Revision A
Date
April 2017
Initial release of the Flow-X Manual Volume I - Installation.
D-sub 37 pinout corrected.
RS-485 connections specified.
Added schematic for analog output.
Updated the XP bracket drawing.
Added power consumption specifications.
Updated Flow-X/R data.
Added HART multi-drop schematic.
Added MTL Barrier schematics for analog signals.
Added connection diagram for Solartron densitometer.
Added maintenance and cleaning instructions.
Added chapter for description of operator panels and user interfaces.
Added wiring diagram for Honeywell Enraf Calibron prover.
Added paragraph on prover signals connection.
Added earth ground connection paragraph and diagrams.
Updated the software setup requirements and installation information.
Added recommendation for forced ventilation.
Added a caution notification for the fact that analog inputs don’t have overvoltage and overcurrent protection for reason of
accuracy.
Added Flow-X/K specifications.
Updated the supported Windows and Excel versions.
Revision B
Date
November 2017
Flow X/C related changes.
Supported baudrate range for Serial communication is updated.
Update to new ABB lay-out.
Document code: IM/FlowX-EN.
Reintroduce revisions chapter.
Revision C
Date
March 2018
Added Flow-X/B specifications.
Updated drawings in Drawings chapter
Revision D
Date
June 2018
Flow-X/P version 2 hardware specific information added.
Supported Liquid and Gas calculations updated.
Added WEEE guideline.
Corrected Flow-X/C picture.
Revision E
Date
October 2018
Added recycling information in accordance with WEEE.
Windows 8 removed from software requirements.
Revision F
Date
February 2019
Added section with regulatory compliance
