ABB RMC-100, User Manual

Page: 81 / 215

2105552MNAE | RMC-100 | 81
applications, as in Table 5-2 . Keep or change those assignments; or use unassigned annunciators to
add other applications.
This procedure assigns one of the unassigned annunciators to one of the measurement applications
instances, AGA3-1.
IMPORTANT NOTE: Assign up to eight annunciators to the applications. An application must be
instantiated before assignment. If there are not enough available annunciators, reassign default
ones, as necessary.
Figure 5-11: Default annunciator assignments
To assign the applications to an annunciator:
1. Click Display on the navigation tree.
2. Click Annunciators . The current annunciator assignments display ( Figure 5-12 ).