11.6.16.1
Remote communication
Test/Function status/Communication/Remote communication/CRx
Displays an application dependent number of instances of CRB (Remote Binary
Communication) and up to four instances of CRM (Remote Multi Communication)
with measurement data.
11.6.16.2
View station communication values
Receiving Interlock Information
Test/Function status/Communication/Station communication/
ReceivingInterlInfo
The Receiving Interlock information available here indicates the state of various
apparatus such as whether they are in a closed or open position and if their status is
valid. Up to 59 apparatuses can be displayed. There are also indications of reservation
requests, reservation granted and the validity of data and communication.
GOOSE Binary Receive
Test/Function status/Communication/Station communication/
GOOSEBinReceive
Up to ten sets of GOOSE binary signals can be viewed here. There are sixteen signal
indications per set.
MultiCommand send
Test/Function status/Communication/Station communication/
MultiCommandSend
The MultiCommand Send indication is used to display data from the Local Optical
network (LON).
MultiCommand receive
Test/Function status/Communication/Station communication/
MultiCommandReceive
The MultiCommand Receive indications displayed here show up to 60 sets of output
data. Each set of output data has 16 signals. Other information displayed here shows
whether there has been a change in data and whether data is valid.
11.6.17
View setting groups
Test/Function status/Setting groups
Displays six setting groups and indicates which of them is in use.
Section 11
Test the IED
72
Operator's manual
1MRK504049-UEN rev. D
RET 670
