The IED 670 engineering guide (EG)
contains instructions on how to engineer the
IED 670 products. The manual guides to use the different tool components for IED
670 engineering. It also guides how to handle the tool component available to read
disturbance files from the IEDs on the basis of the IEC 61850 definitions. The third
part is an introduction about the diagnostic tool components available for IED 670
products and the PCM 600 tool.
1.1.2
About the operator’s manual
Use the operator’s manual for instruction on how to perform common tasks during
normal service.
The operator’s manual contains the following chapters:
•
The chapter
“Safety information”
presents warnings and notices, which the user
should pay attention to.
•
The chapter “
Overview
” describes operations an operator may perform on a daily
basis or when the need arises.
•
The chapter “
Understand the local human-machine interface”
describes how to
use the human-machine interface.
•
The chapter
“Understand the HMI tree”
describes the different menu trees.
•
The chapter
“Read measured values”
describes how to locate and identify
available measurement data.
•
The chapter
“Event list”
describes the location and nature of recorded events.
•
The chapter “
Handle disturbances”
describes how to retrieve disturbance
information and reset alarms.
•
The chapter “
Read and change settings”
describes how to locate, and change
settings and parameters.
•
The chapter
“Diagnose IED status”
describes the location and use of available
diagnostic tools.
•
The chapter
“Test the IED”
describes the tests applicable to the IED.
•
The chapter “
Control and supervise the bay”
describes how to use the Single
Line Diagram to open and close primary apparatuses.
•
The chapter
“Reset”
describes resetting procedures.
•
The chapter
“Authorization”
describes user categories and password procedures.
•
The chapter
“Glossary”
describes words and acronyms used in the literature
describing the IED.
This manual does not contain any instructions for commissioning or testing.
1.1.3
Intended audience
General
The operator’s manual addresses the
operator
, who operates the IED on a daily basis.
Section 1
Introduction
10
Operator's manual
1MRK504049-UEN rev. D
RET 670
