Displays up to four instances of the function (CR) with 12 measurements per instance.
Apart from the measurement for exchange signals between different BayRes blocks
the output values are all boolean and indicate the status of processes and devices.
11.6.11.18
Reservation input (RESIN)
Test/Function status/Control/Apparatus control/ReservationInput
Displays up to 60 instances of the function (RE) with six measurements per instance.
Apart from the exchange measurement (EXCH_OUT), the measurement outputs are
all boolean and provide information about acknowledgements from other bays,
reservation requests form other bays (RE_RQ_B) and also validity checks regarding
requests (V_RE_RQ).
11.6.11.19
Bay control (QCBAY)
Test/Function status/Control/AppCtrlInterlock/BayControl
Displays up to six instances of the function (CB) with three measurements per
instance. The operator place allocation (PSTO) measurement has an integer as output
data, whereas the Update of position is blocked (UPD_BLKD) and Function is
blocked for commands (CMD_BLKD) have boolean output data.
11.6.12
Commands
In the commands menu it is possible to view three sets of values. These are found
under the submenus
Single command
,
Selector switch
and
IEC60870–5–103.
11.6.12.1
Single command
Test/Function status/Control/Commands/Single command
There are three sets of 16 OUT signals under the Single command menu.
11.6.12.2
IEC60870–5–103
The path to the IEC60870–5–103 menu is:
Test/Function Status/Commands/IEC60870–5–103
Under this part of the HMI tree there are the following three submenus:
•
IED Commands
•
Function Commands
•
User Defined Commands
Various IED, function and user defined command data can be viewed here.
Section 11
Test the IED
68
Operator's manual
1MRK504049-UEN rev. D
RET 670
