12000079-IEC18000488-1-en.vsdx
IEC18000488 V1 EN-US
Figure 7:
Comparison of system databases
Table 5:
Dialog items of Compare system database
Dialog Item
Description
Second database is
stored at PC
Compares the currently open system database with another database
in the PC, which can be chosen by clicking on Select file….
Second database is
at target
Compares the currently open system database with the database in
the protection system. For a faster but less detailed check, tick Only
compare checksum.
Show only
differences
Limits the scope of the report to the differences actually found.
Limit number of
differences
The number entered here determines the number of differences that
can be found before the current comparison operation is aborted.
Show pre-
engineering
changes only for
feeders and
switchgear objects
When this box is checked (default setting), the comparison is
restricted to determining whether changes have taken place in
relation to the pre-engineering data for bays and switchgear.
Generally, the default settings should be retained as otherwise the
number of differences that will be discovered increases considerably
(events, signals etc., are then also taken into account)
Write log file
The results of the comparison are stored in a file.
Compare…
Starts the comparison operation
4.5
View menu
4.5.1
Single-line diagram
GUID-146BCC01-642D-4972-8FC7-16B550979035 v2
This menu item displays a diagram of the plant corresponding to the layout of the connection
diagrams created by ABB. The screenshot in
shows an example of a single-line
diagram.
Section 4
1MRK 500 132-UEN B
HMI500
18
Distributed busbar protection REB500
Operation manual
© Copyright 2019 ABB. All rights reserved
