ABB Relion REB500, Operation Manual

Page: 21 / 102

Table 3: Status bar content
Field Content Description
1 Configurator indicates that configurator mode is active (no target
communication possible)
Operator indicates that operator mode is active (target
communication possible)
2 Online Successfully established contact with the protection system.
Offline No connection to protection system.
Simulation All the functions can be executed without being connected to
a protection device. Random values are generated when
viewing protection unit data, for example, event lists or
measurements. Simulated faults can also be viewed.
3 HMI: [IP:Port] Active Ethernet interface (on the device front), the IP address
and the port connected for the target communication
LAN0: [IP:Port] Active Ethernet interface communication over station bus,
the IP address and the port connected for the target
communication
4 Edit Permits settings to be saved in a file or downloaded to the
protection system.
Read-Only It is only possible to read data.
5 Test Test generator is activated.
Test generator not active
6 Install Installation mode is active (debug mode is inactive)
Install/Debug Installation mode and Debug mode are active
Debug Debug mode is active (Installation mode is inactive)
7 <Setfile> Path and name of the currently open setfile.
8 <action> short message of an ongoing action
4.4 File menu
GUID-F240B0E9-E0C6-4FF3-879A-F9F0A88B2F16 v1
Table 4 summarizes the options available in this menu. The subsequent subsections describe
the menu items Download to protection system… and Compare… in greater detail.
Table 4: Menu items in menu file
Menu Item Description
Open… Opens a database file stored on the computer’s file system.
Save as… Saves the currently open database to the computer’s file
system.
Upload from protection system… Saves a database from the protection system to the
computer’s file system.
Download to protection system… Sends a database file from the computer’s file system to the
protection system.
Compare… Compares a database file on the computer’s file system to the
database of the protection system or to another database file
on the computer’s file system.
Exit Terminates the program; displays a warning if there are
changes that have not been saved. You then have the choice
of saving or discarding them.
1MRK 500 132-UEN B Section 4
HMI500
Distributed busbar protection REB500 15
Operation manual
© Copyright 2019 ABB. All rights reserved