manualshive.com logo in svg

ABB Relion REB500, Operation Manual

Share
Download
ABB Relion REB500 Operation Manual Download Page 22

4.4.1 

Download to protection system

GUID-0605665D-8046-4405-9B1E-A337AA64F876 v2

12000075-IEC18000291-1-en.vsdx

IEC18000291 V1 EN-US

Figure 5:

Download to protection system and comparison of versions

Before downloading proceeds, the tool compares and displays the versions of the new

database with the one in the protection system. You may also enter an index and a comment

beforehand in menu Tools/Version (see 

Section 4.9.1

). Data will only be saved if they are

different or the version index is different.

Data can be correctly downloaded as soon as the user has been logged-in to

the target device.

After the downloading procedure is complete, the protection system restarts. The valid

version can then be verified on the HMI.

The progress of the downloading procedure is shown on the screen in window Download to

protection system see

 Figure 6

. The correct time format must be set via the control panel on

the PC for the procedure to be presented correctly. The procedure can be interrupted by the

user as far as Archive data in the protection system.

Section 4

1MRK 500 132-UEN B

HMI500

16

Distributed busbar protection REB500

Operation manual

© Copyright 2019 ABB. All rights reserved

Summary of Contents for Relion REB500







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands