ABB RELION 650 SERIES, Applications Manual

Page: 181 / 262

10.5 Selector mini switch VSGGIO
10.5.1 Identification
SEMOD167850-2 v2
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Selector mini switch VSGGIO - -
10.5.2 Application
SEMOD158803-5 v5
Selector mini switch (VSGGIO) function is a multipurpose function used in the configuration tool in
PCM600 for a variety of applications, as a general purpose switch. VSGGIO can be used for both
acquiring an external switch position (through the IPOS1 and the IPOS2 inputs) and represent it
through the single line diagram symbols (or use it in the configuration through the outputs POS1
and POS2) as well as, a command function (controlled by the PSTO input), giving switching
commands through the CMDPOS12 and CMDPOS21 outputs.
The output POSITION is an integer output, showing the actual position as an integer number 0 – 3.
An example where VSGGIO is configured to switch Autorecloser enabled–disabled from a button
symbol on the local HMI is shown in figure 94 . The Close and Open buttons on the local HMI are
normally used for enable–disable operations of the circuit breaker.
IEC07000112-2-en_ansi.vsd
PSTO
CMDPOS12
IPOS1
NAM_POS1
NAM_POS2
IPOS2
CMDPOS21
Disabled
Enabled
VSGGIO
SMBRREC_79
ON
OFF SETON
INTONE
INV
OUT
INPUT
ANSI07000112 V2 EN-US
Figure 94: Control of Autorecloser from local HMI through Selector mini switch
10.5.3 Setting guidelines
SEMOD158807-4 v3
Selector mini switch (VSGGIO) function can generate pulsed or steady commands (by setting the
Mode parameter). When pulsed commands are generated, the length of the pulse can be set using
the tPulse parameter. Also, being accessible on the single line diagram (SLD), this function block
has two control modes (settable through
CtlModel): Dir Norm and SBO Enh.
1MRK 505 287-UUS B Section 10
Control
Busbar protection REB650 175
Application manual
© Copyright 2013 ABB. All rights reserved