ABB REL 501-C1 2.5, Technical Reference Manual

Page: 187 / 238

175
Supervision of AC input quantities (DA) Chapter 11
Monitoring
RepInt 0-3600
Step: 1 0 s Time between reports for U in seconds. Zero
= Off (duration of time interval between two
reports at periodic reporting function. Setting
to 0 disables the periodic reporting
EnDeadB Off, On Off - Enable amplitude dead band supervision for
U
DeadBand 0.0-1999.9
Step: 0.1 5.0 kV Amplitude dead band for U
EnIDeadB Off, On Off - Enable integrating dead band supervision for
U
IDeadB 0.0-1999.9
Step: 0.1 10.0 kV Integrating dead band for U
EnDeadBP Off, On Off - Enable periodic dead band reporting U
Mean current measuring channel I
:
DA12-
Operation Off, On Off - Operating mode for DAnn function
Hysteres 0-99999
Step: 1 50 A Alarm hysteresis for I
EnAlRem Off, On On - Immediate event when an alarm is disabled
for I (produces an immediate event at reset
of any alarm monitoring element, when On)
EnAlarms Off, On Off - Set to 'On' to activate alarm supervision for I
(produces an immediate event at operation
of any alarm monitoring element, when On)
HiAlarm 0-99999
Step: 1 900 A High Alarm level for I
HiWarn 0-99999
Step: 1 800 A High Warning level for I
LowWarn 0-99999
Step: 1 200 A Low Warning level for I
LowAlarm 0-99999
Step: 1 100 A Low Alarm level for I
RepInt 0-3600
Step: 1 0 s Time between reports for I in seconds. Zero
= Off (duration of time interval between two
reports at periodic reporting function. Setting
to 0 disables the periodic reporting)
EnDeadB Off, On Off - Enable amplitude dead band supervision for
I
DeadBand 0-99999
Step: 1 50 A Amplitude dead band for I
EnIDeadB Off, On Off - Enable integrating dead band supervision for
I
IDeadB 0-99999
Step: 1 10000 A Integrating dead band for I
EnDeadBP Off, On Off - Enable periodic dead band reporting I
Parameter Range Default Unit Description