ABB REL-300, Instruction Leaflet

Page: 93 / 135

I.L. 40-385.1B
4-14 (5/92)
TABLE 4-3. TARGET (FAULT DATA) DISPLAY
(SHEET 1 OF 2)
Displayed at
Function Value
Information Field Field
Month / Day DATE XX.XX
Year YEAR XXXX
Hour / Minute TIME XX.XX
Second SEC XX.XX
Fault type FTYP AG/BG/CG/AB/BC/CA/
ABG/BCG/CAG/ABC
BKR.#1
φ
A tripped BK1A YES/NO
BKR.#1
φ
B tripped BK1B YES/NO
BKR.#1
φ
C tripped BK1C YES/NO
BKR.#2
φ
A tripped BK2A YES/NO
BKR.#2
φ
B tripped BK2B YES/NO
BKR.#2
φ
C tripped BK2C YES/NO
Zone 1 phase tripped Z1P YES/NO
Zone 1 ground tripped Z1G YES/NO
Zone 2 phase tripped Z2P YES/NO
Zone 2 ground tripped Z2G YES/NO
Zone 3 phase tripped Z3P YES/NO
Zone 3 ground tripped Z3G YES/NO
Pilot phase tripped PLTP* YES/NO
Pilot ground tripped PLTG* YES/NO
High set phase tripped ITP YES/NO
High set ground tripped ITG YES/NO
Close-into fault trip CIF YES/NO
Load-loss tripped LLT YES/NO
Ground backup tripped GB YES/NO
SPF tripped (SPF) SPT* YES/NO
62T tripped (SPT) 62T* YES/NO
Fault location Z (In ohms)
Fault Z angle FANG (numerical)
Fault distance DMI or DKM (in miles or KM)
Prefault load current PFLC numerical, A
Prefault phase voltage PFLV numerical V
Prefault load angle LP numerical deg.
Carrier send SEND* YES/NO
Receiver #1 RX1* YES/NO
Receiver #2 RX2* YES/NO
Weakfeed tripped WFT* YES/NO