ABB REL-300, Instruction Leaflet

Page: 125 / 135

I.L. 40-385.1B
Index-2 (5/92)
C
CG Phase C-to-Ground Fault . . . . . . . . . . . . . . . . . . . . . . . [4-14], [6-2], [6-10]
CIF Close-Into-Fault . . . . . . . . . . . . . . . . . . . . . . . . . . . . [1-2], [2-2], [3-3], [3-5], [3-6], [3-10],
[4-12], [5-1], [5-6], [6-6], [6-7], [6-11],
[6-12]
CIFT Close-Into-Fault Trip . . . . . . . . . . . . . . . . . . . . . . . . . . [2-2], [3-5], [3-6], [5-6], [6-6], [6-11]
CONV Signal for A/D Converter . . . . . . . . . . . . . . . . . . . . . . . .
CR Carrier Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . [3-10], [3-15]
ct Current Transformer . . . . . . . . . . . . . . . . . . . . . . . . . . [1-2]
CTR Current Transformer Ratio setting . . . . . . . . . . . . . . . . . . . [5-1], [5-4]
CTYP Current Transformer type setting (1A or 5A ct) . . . . . . . . . . . . [4-12], [5-4], [5-7], [6-1], [6-11]
D
DIRU Directional control type (ZSEQ/NSEQ/DUAL) for FDOG & RDOG . . [3-4], [3-6], [3-7], [3-14], [5-6],
[6-1], [6-6], [6-12], [6-19], [6-20]
DKM Distance Unit (k meters) . . . . . . . . . . . . . . . . . . . . . . . . [4-14]
DMI Distance Unit (miles) . . . . . . . . . . . . . . . . . . . . . . . . . .
DTYP Distance unit selected for XPUD setting (KM or MI) . . . . . . . . . . [2-2], [4-10], [5-5]
DUAL Dual (V or I) Zero Sequence Polarizing Unit for FDOG or RDOG . . . [3-4], [3-6], [3-14], [4-11], [5-6],
[6-1], [6-6], [6-12]
dVdI Delta V and Delta I - Line Disturbance. . . . . . . . . . . . . . . . . [3-9], [4-5]
E
EEPROM Electrically Erasable Programmable Read Only Memory . . . . . . . [1-2], [1-5], [4-4]
EPROM Erasable Programmable Read Only Memory . . . . . . . . . . . . . [1-2], [1-4], [1-5]
F
FANG Fault angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [5-5]
FDAT Fault Data Initiation . . . . . . . . . . . . . . . . . . . . . . . . . . [3-8], [4-3], [4-4], [4-5], [5-4]
FDGT Forward Directional Ground Timer. . . . . . . . . . . . . . . . . . . [1-4], [2-2], [3-14], [5-5], [6-9]
FDOG Forward Directional Overcurrent Ground Unit determined by
setting if DIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [1-4], [3-2], [3-3], [3-5], [3-6], [3-7], [3-10],
[3-13], [3-14], [4-12], [5-2], [5-5], [5-6]
[6-5], [6-7], [6-9]
FDOP Forward Directional Overcurrent Phase . . . . . . . . . . . . . . . . [3-2], [3-7], [3-10], [3-13], [6-5]
FREQ Frequency setting selected (50Hz or 60Hz) . . . . . . . . . . . . . . [4-10], [5-4], [6-1], [6-11]
FTYP MDAR fault type . . . . . . . . . . . . . . . . . . . . . . . . . . . . [6-2], [6-11]
G
GANG Zero sequence line impedance angle setting . . . . . . . . . . . . . [5-6], [6-2], [6-4], [6-10]
GB Ground backup trip target . . . . . . . . . . . . . . . . . . . . . . . [3-4], [3-5], [5-3], [5-5], [5-6], [6-5], [6-7]
GBCV Ground backup curve selection . . . . . . . . . . . . . . . . . . . . [3-4], [5-3], [6-5], [6-20]
GBPU Ground backup pickup multiplier setting . . . . . . . . . . . . . . . . [3-4], [5-3], [6-6]
GDIR Directional or Non-directional ground backup . . . . . . . . . . . . . [3-4], [5-3], [5-6], [6-5], [6-6]
GS General Start for External Record . . . . . . . . . . . . . . . . . . . [1-2], [3-6], [3-7], [6-2]
GTC Ground backup time dial setting . . . . . . . . . . . . . . . . . . . . [3-4], [5-3], [6-5], [6-6]