ABB REL-300, Instruction Leaflet, Page: 91 / 135

I.L. 40-385.1B
4-12 (5/92)
TABLE 4-1. SETTING DISPLAY
(SHEET 3 OF 3)
Displayed at
Function Field Value Field
Information/Settings (using 5 A ct and 60 Hz)
(SEE NOTE)
CIF trip/stub bus protection CIF CIFT/STUB/BOTH/NO
LLT trip LLT YES/FDOG/NO
LOP block LOPB YES/NO
LOI Block LOIB YES/NO
Alarm 2 (Trip) Seal-In AL2S YES/NO
Remote Setting SETR YES/NO
Real Time Clock TIME YES/NO
1. Set Year YEAR 1980-2079, in 1 year steps
2. Set Month MNTH 1-12, in 1 month steps
3. Set Day DAY 1-31 in 1 day steps
4. Set Weekday WDAY Sun, Mon, Tues,
Wed, Thur, Fri, Sat
5. Set Hour HOUR 0-24, in 1 hour steps
6. Set Minute MIN 0-60, in 1 minute steps
NOTE: WHEN THE CTYP FUNCTION IS SET AT 1 AMPERE, THE RANGE OF THE FOLLOWING FUNC-
TIONS ARE AS SHOWN BELOW:
• ZIP/ZIG/Z2P/Z2G Z3P/Z3G/PLTP/PLTG 0.05-250.00, in 0.05
Ω
steps
• ITP/ITG 0.4-30.0, in 0.1 A steps
• IL/IOS/IOM 0.1-2.0, in 0.02 A steps
NOTE: SEE ALSO SECTION 5.2.4, SELECTIONS OF CTYP SETTINGS.
NOTE: SEE PREFACE FOR INFORMATION ON SETTING NOMENCLATURE APPLIQUES.
NOTE: The increments of timers are based on the line frequency, e.g., 16 msec for 60 Hz and 20 msec
for 50 Hz (to the nearest msec)