![background image](http://html.mh-extra.com/html/abb/rcna-01/rcna-01_user-manual_205064.webp)
Fault tracing
64
Drive actual values can be read, but the control commands (start/
stop or reference) do not go through:
• Check that the control location parameters of the drive are set to
use the RCNA-01 as the source of the required command.
• Check that the drive is in REMOTE control.
PLC programming
The PLC program is beyond ABB Drives support. Contact the
manufacturer for assistance.
Scanner fault indications
Refer to scanner documentation.
Summary of Contents for RCNA-01
