Introduction
13
RCNA-01 ControlNet Adapter module
The RCNA-01 Adapter module is one of the optional fieldbus
adapter modules available for ABB drives. The RCNA-01 is a
device through which an ABB drive is connected to a ControlNet
serial communication bus.
Output
In this manual, the word ’output’ is used to describe data flow from
the ControlNet Scanner.
Parameter
A parameter is an operating instruction for the drive. Parameters
can be read and programmed with the drive control panel, or
through the RCNA-01 module.
Product and service inquiries
Address any inquiries about the product to your local ABB
representative, quoting the type code and serial number of the unit
in question. A listing of ABB sales, support and service contacts
can be found by navigating to
www.abb.com/drives
and selecting
Sales, Support and Service network
.
Product training
For information on ABB product training, navigate to
www.abb.com/drives
and select
Training courses
.
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to
www.abb.com/drives
and select
Document Library
–
Manuals
feedback form (LV AC drives)
.
Summary of Contents for RCNA-01
