manualshive.com logo in svg

ABB RCNA-01, User Manual

Share
Download
ABB RCNA-01 User Manual Download Page 35

Communication

35

The format of the input assembly is:

Note: 

If the BASIC SPEED CONTROL or the EXTENDED SPEED 

CONTROL assembly is used, it must be ensured that the fieldbus 
is selected as the drive control source and fieldbus specific 
(Generic Drive profile) Control/Status Word format is selected 
instead of ABB Drives profile.

EXTENDED SPEED CONTROL assembly

The EXTENDED SPEED CONTROL assembly is defined by the 
ControlNet AC/DC Drive Profile. The format of the output 
assembly is:

Instance 70 (Input assembly)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3

Bit 2

Bit 1

Bit 0

0

Running 1

Faulted

1
2

Speed Actual Value (Low Byte) *

3

Speed Actual Value (High Byte) *

* Scaling of Speed Actual Value is configured by Speed Scale attribute in 
AC/DC-Drive Object (class 0x2A, instance 0x01, attribute 0x16), and it 
defaults to 1 rpm.

Instance 21 (Output assembly)
Byte Bit 7 Bit 6

Bit 5

Bit 4 Bit 3 Bit 2

Bit 1

Bit 0

0

NetRef NetCtrl

Fault 
Reset

Run 
Reverse

Run 
Forward

1
2

Speed Reference (Low Byte) *

3

Speed Reference (High Byte) *

* See 

BASIC SPEED CONTROL assembly

 for information on speed 

reference scaling.

Summary of Contents for RCNA-01





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands