76
| NG C820 0 AN D PGC1000 US ER MAN UA L | 2101510MNA H
1.
Select
Calibration
on the right side of the
Operation
screen. The Calibration Setup window
appears.
2.
On the
Setup
tab, set up the blend concentrations.
Figure 7-1: Set up gas concentrations
3.
Click
Send
.
4.
From the Operation screen, select
Cal
.
Figure 7-2: Run calibration
5.
When the current cycle completes, the device should begin a calibration on the designated
calibration stream (default is stream 4).
