20
MOU NTI NG A N D OPE R ATI ON M A N UA L
I N D O O R A I R S W I TC H - D I S CO N N EC TO R , N A L /N A L F/ V R
S
F
Max. 40°
4. Secure the bevel gear with two screws located
inside the housing with allen key (2,5 size) with
torque 3 Nm (see Fig. 16).
5. Install the hand operating mechanism HE. Put
the connection rod (tube = 26.9 mm) between
cardanic joint and bevel gear. Maximum angle is
40
o
- see Fig. 17.
6. Mark the position of the hole for the safety pin
hole and do not make a bigger hole than = 10.1
mm (see Fig.18).
—
16 HE hand operating mechanism
—
17 Hand operating mechanism
—
18 Connecting rod
