manualshive.com logo in svg

ABB IRB6400, Assembly Manuallines

Share
Download
ABB IRB6400 Assembly Manuallines Download Page 89

Disassembly/Assembly
Guidelines
IRB 6400

Page 6 - 7

Axes 2 & 3 Guidelines

 4. MOUNT MOTOR MOUNTING PLATE (S37):

a.

Lightly grease O-Ring (S36) with lubricating grease (S74). 

Position O-Ring in place.

b.

Slip motor mounting plate onto guide pins and into mounted 

position. Orient so that the two magnetic plugs (S40) are in a 

horizontal position.

c.

Lubricate all screws (S31) and washers (S30) with Molycote 1000 

grease.

d.

Insert screws (S31) with washers (S30) into motor mounting 

plate, removing the two guide pins for last two screws. Torque to 

90 ft-lb.

NOTE: Pinion is matched to the gear reduction 

unit. If a new motor is going to be installed, 

mount the old pinion on the new motor shaft. 

If a new gear reduction unit is going to be 

installed, mount the new pinion that comes 

with it on the motor shaft

5.

INSTALL MOTOR as outlined on page 6 - 3.

6.

GREASE GEAR REDUCTION UNIT (S35) as outlined in Section 4

.

7.

CALIBRATE AXIS as outlined in Section 11. 

Summary of Contents for IRB6400





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands