manualshive.com logo in svg

ABB IRB6400, Assembly Manuallines

Share
Download
ABB IRB6400 Assembly Manuallines Download Page 44

Disassembly/Assembly
Guidelines
IRB 6400

Page 4 - 9

Maintenance

Oil Change for Axis 5 Gearbox (W8 )

•  

Move the upper arm to the horizontal position with axis 4 9 0

o

 .

•  

Open the oil plug 1, and then oil plug 2 so that air can enter .

•  

Manually release Axis 4 brake (see page 3-5) and rotate axis 4 manually 
backwards and forwards to drain the oil, after first releasing the brake on 
Axis 4.

•  

Clean the magnetic drain plug 1 before refitting .

•  

Turn Axis 4 90

o

 before filling oil. Fill the oil through hole 1, until the oil is 

level with the lower edge of the filler hole .

For S/2.9-120 Robots:

•  

Move the upper arm to the max. upper position before draining the oil .

•  

Move the upper arm to the vertical position before filling oil.  

•  

Fill up with new oil until the oil is level with the edge of hole 1 .

Volume: 

5 litres (1.38 US gallon).
Correct oil level for axis 5 is to the lower edge of the oil level plug .

HOLE 1 - FILL

HOLE 1

HOLE 2

FILL POSITION

DRAIN POSITION

Summary of Contents for IRB6400





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands