manualshive.com logo in svg

ABB IRB6400, Assembly Manuallines

Share
Download
ABB IRB6400 Assembly Manuallines Download Page 38

Disassembly/Assembly
Guidelines
IRB 6400

Page 4 - 3

Maintenance

MAINTENANCE INSTRUCTIONS

General Instruction s

Check regularly:

•  

for any oil leaks. If a major oil leak is discovered, call for service personnel .

•  

for excessive play in gears. If play develops, call for service personnel .

•  

that the cabling between the control cabinet and robot is not damaged .

Cleaning:

Clean the robot exterior with a cloth when necessary. Do not use aggre s-
sive solvents which may damage paint or cablin g

Checking Oil and Grease Level s

Axes 1, 2, 3 and 6

The level in the gearboxes is checked by adding new grease, until grease 
comes out through the special draining holes. See pages 4-5, 4-6, 4-11 .

Axes 4 and 5.

The level is checked by opening the oil plugs. See pages 4-7, 4-9 .

Summary of Contents for IRB6400





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands