manualshive.com logo in svg

ABB IRB6400, Assembly Manuallines

Share
Download
ABB IRB6400 Assembly Manuallines Download Page 102

Disassembly/Assembly
Guidelines
IRB 6400

Page 6 - 20

Axes 2 & 3 Guidelines

7.

REMOVE SHAFTS (L16) and (L18):

a.

Remove two set screws (U64) which lock shafts (L16) & (L18) in 

place. These screws MUST be removed before trying to unscrew 

shafts (L16) and (L18).

WARNING!  DO NOT ATTEMPT TO REMOVE SHAFTS (l16) OR 

(L18) WITHOUT FIRST REMOVING SET SCREWS (U64)!

b.

Carefully unscrew shafts (L16) and (L18) from lower arm frame 

(L17). Protect threads from damage.

NOTE:  Both shaft assemblies (Ll16) & (L18) 

have nilos rings (L11) or (L22), spacers (L10) 

or (L23), bearing (L12) or (L21), sealing ring 

(L13) or (L20), and V-ring (L15) or (L19) .

CAUTION:  SHAFT (L16) HAS AN ADDITIONAL SPACER (L14). 

THIS ADDED SPACER IS IMPORTANT DURING REASSEMBLY.

8.

LIFT UPPER ARM ASSEMBLY AWAY AND SET IT IN A SAFE PLACE

.

C

E

E

UPPER ARM 
ASSEMBLY WEIGHS
APPROX. 500 LB.

Summary of Contents for IRB6400





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands