manualshive.com logo in svg

ABB IRB6400, Assembly Manuallines

Share
Download
ABB IRB6400 Assembly Manuallines Download Page 175

Disassembly/Assembly
Guidelines
IRB 6400

Page 11 - 6

Robot Calibration

Rough Resolver Calibration Procedure (Cont)

The calibration status can be any of the following:

Synchronized 

- Indicates that there are calibration

values for each axis and that the counters are
updated. This does 

NOT

 necessarily mean

that they are correct.

Not updated rev. counter

 - Indicates that one or

more axis revolution counter is not updated.

Not calibrated - 

Indicates that one or more axis do

not have calibration values stored.

3.

Press:

CALIB

CALIBRATE

The window below will appear.

4.

The “X” indicates chosen axes. Press the 

ALL

function button to select all axis to be calibrated or
move the cursor to the desired axis or axes and
press 

INCL 

to include the axes to be calibrated.

           3                      Calibrated

Calibrate

IRB

3 (6)

Status

To calibrate, include axes and press OK.

Axis

X        1                       N ot Calibrated

           4                      Calibrated

           5                      Calibrated

           6                      Calibrated

Incl

All

Cancel

OK

X        2                      Not Calibrated

Summary of Contents for IRB6400





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands