Note
Action
WARNING
Handling gearbox oil involves several safety
risks. Before proceeding, please read the
safety information in the section
during work with gearbox lubricants (oil or
grease) on page 37
.
2
CAUTION
The gearbox can contain an
excess of
pressure
that can be hazardous. Open the
oil plug carefully in order to let out the ex-
cess pressure.
3
See the figure in:
•
Location of oil plugs on page 167
Open
oil plug, filling
.
4
Where to find type of oil and total amount
is detailed in
Refill the gearbox with
lubrication oil
.
Note
The amount of oil to be filled depends on
the amount previously being drained.
5
How to inspect the oil level is described
in section:
•
Inspecting the oil level, axis 2
gearbox on page 119
Inspect the oil level.
6
Tightening torque:
•
24 Nm
Refit
oil plug
.
Note
Before refitting the oil plug in the gearbox,
always replace the oil plug sealing washer
with a new one. If not there is a risk of
leakage.
7
Seal and paint the joints that have been
opened. Also repair possible damages of
the special Foundry Prime paint coat of the
robot. See
Cut the paint or surface on the
robot before replacing parts on page 201
.
8
170
Product manual - IRB 4600 Foundry Prime
3HAC040585-001 Revision: M
© Copyright 2013-2018 ABB. All rights reserved.
3 Maintenance
3.5.4 Changing the oil, axis-2 gearbox
Continued
Summary of Contents for IRB 4600 Foundry Prime
