ABB IRB 1100 Product Manual Download

Page: 218 / 766

Note

Action

xx1800003030

Reconnect the connectors.

•

J2.FB2,3,4,5,6

•

J2.MP3,4,5/6

Tip

See the number markings on the connectors for
help to find the corresponding connector.

Route and secure the cabling with cable straps.

CAUTION

Correct cable routing is highly important.
If the cables are routed and secured incorrectly
the cables can be damaged.

Screw: M3x8 12.9 Lafre
2C2B/FC6.9 (2 pcs)

Refit the connector plate.

Tightening torque: 0.8 Nm

xx1800002489

Refitting the swing covers

Note

Action

For robots with protection type Clean Room:

Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.

Continues on next page

218

Product manual - IRB 1100

3HAC064992-001 Revision: L

5 Repair

5.3.2 Replacing the lower cable package

Continued

Summary of Contents for IRB 1100































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1100

Reviews:

Related manuals for IRB 1100

Brands by name

Popular brands

ABB IRB 1100, Product Manual

Search results

Summary of Contents for IRB 1100

Reviews:

Related manuals for IRB 1100

Brands by name

Popular brands