ABB IRB 1100 Product Manual Download Page 480

Page: 480 / 766

Note

Action

xx1900000008

Install an M4x25 or longer adjustment screw to
the motor.

Note

Do not insert the entire screw to the hole.

Initial referenced force for used
belt: 13.58-14.84 N (for reference
only)

Use a handheld dynamometer hooking to the
screw and pull the dynamometer to reach the ini-
tial referenced force.

Initial referenced force for new belt:
19.4-21.2 N

xx1900000027

Tightening torque: 1.4 Nm

xx1800003290

Secure the motor with the screws.

Used belt: 151-162 Hz

Use a sonic tension meter to measure the timing
belt tension.

New belt: 167-213 Hz (for reference
only)

If the timing belt tension does not meet the require-
ment, loosen the motor screws and readjust.

Continues on next page

480

Product manual - IRB 1100

3HAC064992-001 Revision: L

5 Repair

5.6.2 Replacing the extender unit and wrist

Continued

Summary of Contents for IRB 1100































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1100

Reviews:

Brands by name

Popular brands

ABB IRB 1100, Product Manual

Search results

Summary of Contents for IRB 1100

Reviews:

Brands by name

Popular brands