ABB FCAN-01, User Manual

Page: 50 / 176

50 Start-up
31 D2FBA comm sta Read-only. Displays the status of the fieldbus
adapter module communication.
Note: The value names may vary by drive.
0 = Idle
OR
4 = Off-
line
0 = Idle Adapter is not configured.
1 = Exec.init Adapter is initializing.
2 = Time out Time-out has occurred in the communication
between the adapter and the drive.
3 = Conf.err Adapter configuration error: Major or minor
revision code of the common program revision
in the fieldbus adapter module is not the
revision required by the module or mapping file
upload has failed more than three times.
4 = Off-line Adapter is off-line.
5 = On-line Adapter is on-line.
6 = Reset Adapter is performing a hardware reset.
32 FBA comm SW
rev Read-only. Displays the common program
revision of the adapter module in format axyz ,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Example: 190A = revision 1.90A
N/A
Common program version of the adapter
module
33 FBA appl SW ver Read-only. Displays the application program
revision of the adapter module in format axyz ,
where:
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Example: 190A = revision 1.90A
N/A
Application program revision of the adapter
module
No. Name/Value Description Default
setting