ABB DressPack IRB 6700, Product Manual

Page: 68 / 574

Note Action
Do not tighten the screw. Fit the transport support’s lower end to the
robot using the recommended screw joint,
(A) in figure. 1
See attachment point for the specific ro-
bot in the section
Transport position with
a transport support on page 65 .
CAUTION
Do not try to jog the robot to the exact
position (max distance 1mm).
Jog the robot into a position as near above
as possible to the recommended transport
position for the specific robot, as specified
in section
Transport position with a transport
support on page 65 .
2
See attachment point for the specific ro-
bot in the section
Transport position with
a transport support on page 65
Use the brake release for axis 3 to reach the
final resting position on the transport support,
see the section
Manually releasing the brakes
on page 82 .
3
CAUTION
Do not attempt to tighten any attachment
screws without first releasing the brakes.
This can seriously damage the robot.
Tighten all the attachment screws, (A) and
(B), in the figure with the brake release for
axis 3 still activated starting with the lower
attachment screw. 4
Use the brake release for axis 5 and 6 to
reach the final resting position for the tool,
see the section
Manually releasing the brakes
on page 82
5
68 3HAC044266-001 Revision: -
© Copyright 2013 ABB. All rights reserved.
2 Installation and commissioning
2.3.2 Securing the robot
Continued