ABB DPA Upscale M 10, User Manual

Page: 80 / 133

Section-3
04-3006_S3_OPM_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc
Page 3/4 ABB
Modifications reserved
3.1.1 Customer interface and DRY PORTs (volt-free contacts)
All the Input and Output interfaces are connected to Phoenix terminals (cable 0.5 mm2)
3.1.1.1 Output Interfaces Terminal blocks X2 (DRY PORTs)

Provision of signals for the automatic and orderly shutdown of servers, AS400 or Automation building systems
3.1.1.2 Input Interfaces Terminal blocks X1

Connection of Remote Shut down facilities, Generator Operation, Customers specials (see Section 9, chapter 1.2 OPTIONS)
All voltage free contacts are rated 60 VAC max. and 500 mA max.:
Block Terminal Contact Signal On Display Function
X2
X2 / 1 NO MAINS_OK Mains Present
X2 / 2 NC ALARM Mains Failure
X2 / 3 C
Common
X2 / 4 NO
LOAD_ON_INV
Load on Inverter
X2 / 5 NC Message
(Load on Mains bypass)
X2 / 6 C
Common
X2 / 7 NO
BATT_LOW Battery Low
X2 / 8 NC ALARM
Battery OK
X2 / 9 C
Common
X2 / 10 NO
LOAD_ON_MAINS Load on bypass (Mains)
X2 / 11 NC
Message (Load on Inverter)
X2 / 12 C
Common
X2 / 13 NO
COMMON_ALARM Common Alarm (System)
X2 / 14 NC
ALARM NO Alarm Condition
X2 / 15 C
Common
X1
X1 / 1
IN
+ 12Vdc
Generator Operation
X1 / 2
GND
GND
(NC = Generator ON)
X1 / 3
IN
+ 12Vdc Customer IN 1
X1 / 4
GND
GND
(Function on request, to be defined)
X1 / 5
IN +
3.3Vdc
Temperature Battery
X1 / 6
GND
GND (If connected , the battery charger current if depending of the battery temp.)
X1 / 7
IN
+ 12Vdc Remote Shut down
X1 / 8
GND
GND
(Do not remove the factory mounted bridge until external Remote Shut down
is connected)
X1 / 9 IN
+ 12Vdc 12 Vdc sourse
X1 / 10
GND
GND (max. 200 mA load)
Phoenix Spring Terminals (X1…X2) Connection