ABB COM600 series, User Manual

Page: 39 / 104

Installation 5.
About this section 5.1.
This section describes the installation and uninstallation of SAB600, the installation of
the touch screen, and modifying and setting up of the COM600 computer. For more
detailed instructions on installation of the gateway components, refer to the 1.10, Related
documents.
It is forbidden to install SAB600 to the COM600 device.
Requirements for SAB600 5.2.
The hardware requirements for SAB600 and supported operating systems are listed in
4.2, Software properties.
Installing SAB600 5.3.
The SAB600 installation DVD includes the SAB600 software and different versions of
the CoDeSys programming environment dependent to the COM600 version. In the
installation wizard you can select, which software you want to install. For installation
of the CoDeSys programming environment, see Installing CoDeSys programming
environment.
To install SAB600:
1. Close all open programs and insert the SAB600 installation DVD to the CD-ROM
drive of your PC.
2. The installation program should start automatically. If the installation does not start,
open the program by browsing to the DVD drive, and start COM_600.exe. The
installation wizard includes the options to install the SAB600 software and different
versions of the CoDeSys programming environment. Select the software that you
want to install.
3. Wait for the Wise Installation Wizard to extract the installation files to your PC.
4. The SAB600 installation program opens. Click Next.
At any stage of the installation, you can return to the previous window by clicking
Back, or exit the Installation Wizard by clicking Cancel.
5. Read the License Agreement, then check the option I accept the license agreement
and click Next to continue the installation.
If you check the option I do not accept the license agreement, the Next button is
not available and you cannot continue the installation.
6. Select the folder where you want to install SAB600.
39
COM600 series, version 4.1
1MRS756125
User's Manual