ABB COM600 series, User Manual

Page: 31 / 104

Standard Description
According to IEC 60529 Degree of protection by
enclosure
According to IEC 60255-5 Clearance and creepage dis-
tances
Table 4.1-8 Power supply and module tests
Standard Description
According to IEC 60255-1 Auxiliary voltage
According to IEC 60255-11 Aux. voltage interruptions
According to IEC 60255-11 15%, f = 2 x fn Ripple in auxiliary DC voltage
According to CE EN 61010 Power consumption
Table 4.1-9 Insulation tests
Standard Description
According to IEC 60255-5 2 kV, 50 Hz for 1 minute Dielectric test
According to IEC 60255-5 5 kV, 1.2/50 μs, 0.5 J Impulse voltage test
According to IEC 60255-5 >100 MΩ, 500 Vdc Insulation resistance
According to IEC 60255-27 <0.1 Ω. Protective bonding impedance
The EMC immunity test level meets the requirements listed below:
Table 4.1-10 Electromagnetic compatibility tests
Standard Description
According to IEC 61000-4-18 and IEC 60255-22-1
• 2.5 kV
• 1.0 kV
1 MHz and 100 kHz burst dis-
turbance test
• Common mode
• Differential mode
According to IEC 61000-4-2, IEC 60255-22-2
• 6 kV
• 8 kV
Electrostatic discharge test
• Contact discharge
• Air discharge
According to IEC 61000-4-3 and IEC 60255-22-3
• 10 V/m (80% amp.mod.)
• f=80...2700 MHz
• 10 V/m (pulse mod.) f=900 MHz
Radio frequency field immunity
According to IEC 61000-4-4 and IEC 60255-22-4
• 2 kV
• 1 kV
Fast transient
• Power supply
• RJ-45 port
According to IEC 61000-4-5 and IEC 60255-22-5
• 2 kV line-to-earth, 1 kV line-to-line
Surge immunity
• Power supply
31
COM600 series, version 4.1
1MRS756125
User's Manual