ABB ACS880-01 Series, Hardware Manual

Page: 23 / 224

Introduction to the manual 23
Quick installation, start-up and operating flowchart
Task See
Plan the electrical installation and acquire the
accessories needed (cables, fuses, etc.).
Check the ratings, required cooling air flow, input
power connection, compatibility of the motor,
motor connection, and other technical data. Planning the electrical installation
(page 53 )
Technical data (page 137 )
Check the installation site. Ambient conditions (page 167 )
Unpack and examine the units (only intact units
may be started up).
Examine that all necessary optional modules and
equipment are present and correct.
Mount the drive. Mechanical installation (page 41 or 43 )
If the drive has been non-operational
for more than one year, the converter
DC link capacitors need to be
reformed (page
134 )
Route the cables. Routing the cables (page 70 )
Check the insulation of the supply cable, the
motor and the motor cable. Checking the insulation of the
assembly
(page 81 )
Connect the power cables.
Connect the control cables. Connecting the power cables (page
84 ), Connecting the control cables
(page 99 )
Check the installation. Installation checklist (page 115 )
Start the drive up. Start-up (page 117 )
Operate the drive: start, stop, speed control etc. ACS880 quick start-up guide, firmware
manual
ACS880-01 HW.book Page 23 Monday, July 1, 2013 4:51 PM