![background image](http://html1.mh-extra.com/html/abb/acs355-series/acs355-series_manual_3365242012.webp)
12 Introduction
Contents
This manual consists of the following chapters:
•
) provides an overview of the safety instruction to follow when using the
solar pump inverter.
•
(page
) provides an overview of this manual.
•
Operating principle and hardware description
(page
) includes the overview of the
solar pump inverter and its hardware connections.
•
(page
) provides the basic information about mechanical and
electrical installation and also includes instructions to quickly operate the solar pump
inverter.
•
(page
) provides an overview of the solar pump inverter and
describes the inverter controls to operate the solar pump inverter.
•
(page
) provides an overview of all the solar pump inverter core
features such as MPPT function, dual supply mode, dry run function, and so on.
•
(page
) describes the user adjustable settings of the
required groups for operating the solar pump inverter.
•
(page
) lists all the alarm and fault messages related to the solar pump
inverter and describes the possible cause and corrective actions.
•
(page
) provides the technical specifications of the solar pump
inverter and also the solar status word list.
Related documents
See
on page
(inside the front cover).
Terms and abbreviations
This manual uses the following terms and abbreviations:
Term/Abbreviation
Expansion
Explanation
AM
Asynchronous motor
Three-phase AC voltage induction
motor with squirrel cage rotor.
B
Boolean
Data type boolean
Def
Default Parameter
default
value.
E
European
Refers to types 01E- and 03E- with
European parameterization.
EMC filter connected, 50 Hz
frequency.
FbEq
Fieldbus equivalent
The scaling between the value and
the integer used in serial
communication.
I
Integer
Data type integer
Summary of Contents for ACS355 series
