Safety 7
1
Safety
About this chapter
This chapter contains safety instructions which you must follow when installing, operating
and servicing the ACS355 solar pump inverter. If ignored, physical injury or death may
follow, or damage may occur to the inverter, motor or driven equipment.
Before installing, commissioning or using the inverter, read the safety instructions chapter
in the
ACS355 user’s manual (3AUA0000066143 [English]
).
Before changing any default settings of a function, read the warnings and notes for
specific software function. For each function, the warnings and notes are given in the
subsection describing the related user-adjustable parameters.
Use of warnings
Warnings caution you about conditions which can result in serious injury or death and/or
damage to the equipment, and advise on how to avoid the danger. The following warning
symbols are used in this manual:
Electricity warning
warns of hazards from electricity which can cause physical
injury and/or damage to the equipment.
General warning
warns about conditions, other than those caused by electricity,
which can result in physical injury and/or damage to the equipment.
Summary of Contents for ACS355 series
