ABB ACS 800 Series, Cabinet Installation And Operating Instruction

Page: 105 / 162

Mechanical installation of non-pre-assembled units (ACS800-04M)
105
3
Fastening
the adapter
to the drive
module
- 1. See Fastening the adapter to the drive module on
page 109 .
2.Go to step 4.
4
Fastening
the pedestal
by the base
(not performed
for wall-
mounted units)
Base mounting
from outside 1. See Clamping the pedestal with the outside brackets
on page 80 .
2.Go to step 5.
Base mounting
from inside 1. See Fastening the pedestal through the holes inside
the pedestal on page 80 .
2.Go to step 5.
5
Fastening
the adapter
to the
pedestal
- 1. See Fastening the drive module to the pedestal via
the adapter on page 110.
2.Go to step 6.
6
Connecting
the output
busbars
Units with vertical
busbars 1. See Connecting the output busbars on the short side
of the module on page 111 .
2.Go to step 7.
7
Wall
mounting
(not
performed for
base-mounted
units)
wall-mounted unit 1. See Fastening the drive module to wall (wall-
mounted units only, not for base-mounted units) on
page 81 .
8
Fastening by
top
base-mounted
unit 1. See Fastening the drive module by top to the cabinet
frame on page 81.
Step If Instruction