ABB ACQ580-34, Hardware Manual

Page: 178 / 244

The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Disposal
Generally all metals, such as steel, aluminum, copper and its alloys, and precious
metals can be recycled as material. Plastics, rubber, cardboard and other packaging
material can be used in energy recovery. Printed circuit boards and large electro-
lytic capacitors need selective treatment according to IEC 62635 guidelines. To
aid recycling, plastic parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must
follow international and local regulations.
Applicable standards
The drive complies with the following standards.
European electrical safety requirements product standards
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy EN 61800-5-1:2007
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments. EN 60204-1:2006
+A1:2010
Provisions for compliance: The final assembler of the machine is responsible for
installing:
•emergency-stop device
•supply disconnecting device
•IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code) EN 60529:1991 + A2:2013
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods EN 61800-3:2004 +
A1:2012
Standard for Safety, Adjustable Speed Electrical Power Drive Systems – Part 5-
1: Safety Requirements – Electrical, Thermal and Energy UL 61800-5-1: 1st Edition
General Requirements - Canadian Electrical Code, Part II CSA C22.2 No. 0-10
Adjustable Speed Drives CSA C22.2 No. 274-7
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which are certified
by TÜV according to the relevant functional safety standards. Applicable to drives and inverters;
not applicable to supply, brake or DC/DC converter units or modules.
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by the Un-
derwriters Laboratories. Valid with rated voltages up to 600 V.
178 Technical data