ABB ACQ580-34, Hardware Manual

Page: 17 / 244

• Make sure that the module does not topple over when you move it on the floor: To open
the support legs, press each leg a little down and turn it aside (1, 2). Whenever possible
attach the module also with chains. Do not tilt the drive module. It is heavy and its center
of gravity is high. The module overturns from a sideways tilt of 5 degrees. Do not leave
the module unattended on a sloping floor.
1
2
3
• To prevent the drive module from falling, attach its top lifting lugs with chains to the
cabinet (1) before you push the module into the cabinet and pull it from the cabinet. Push
the module into the cabinet and pull it from the cabinet carefully preferably with help from
another person. Keep a constant pressure with one foot on the base of the module (2)
to prevent the module from falling on its back.
1
2
1
2
Safety instructions 17