ACH580 Installation, Operation and Maintenance Manual
75
ACH580-01 Installation
7181
Brake resistor
Brake resistor broken
or not connected.
Check that a brake resistor has been
connected.
Check the condition of the brake
resistor.
Check the dimensioning of the brake
resistor.
7183
BR excess temperature
Brake resistor
temperature has
exceeded fault limit
defined by parameter
43.11 Brake resistor
fault limit
.
Stop drive. Let resistor cool down.
Check resistor overload protection
function settings (parameter group
43 Brake chopper
).
Check fault limit setting, parameter
43.11 Brake resistor fault limit
.
Check that braking cycle meets
allowed limits.
7184
Brake resistor wiring
Brake resistor short
circuit or brake chopper
control fault.
Check brake chopper and brake
resistor connection.
Ensure brake resistor is not damaged.
7191
BC short circuit
Short circuit in brake
chopper IGBT.
Ensure brake resistor is connected
and not damaged.
Check the electrical specifications of
the brake resistor against chapter
Resistor braking
in the
Hardware
manual
of the drive.
Replace brake chopper (if
replaceable).
7192
BC IGBT excess
temperature
Brake chopper IGBT
temperature has
exceeded internal fault
limit.
Let chopper cool down.
Check for excessive ambient
temperature.
Check for cooling fan failure.
Check for obstructions in the air flow.
Check resistor overload protection
function settings (parameter group
43 Brake chopper
).
Check that braking cycle meets
allowed limits.
Check that drive supply AC voltage is
not excessive.
7310
Overspeed
Motor is turning faster
than highest allowed
speed due to
incorrectly set
minimum/maximum
speed, insufficient
braking torque or
changes in load when
using torque reference.
Check minimum/maximum speed
settings, parameters
30.11 Minimum
speed
and
30.12 Maximum speed
.
Check adequacy of motor braking
torque.
Check applicability of torque control.
Check need for brake chopper and
resistor(s).
73F0
Overfrequency
Maximum allowed
output frequency
exceeded.
Contact your local ABB
representative.
Code
(hex)
Fault / Aux. code
Cause
What to do