found in the local HMI under
Main menu/Diagnostics/IED status/Product
identifiers
The following identifiers are available:
•
IEDProdType
•
Describes the type of the IED. Example:
REL650
•
ProductDef
•
Describes the release number from the production. Example:
2.1.0
•
FirmwareVer
•
Describes the firmware version.
•
The firmware version can be checked from
Main menu/
Diagnostics/IED status/Product identifiers
•
Firmware version numbers run independently from the release
production numbers. For every release number there can be one or more
firmware versions depending on the small issues corrected in between
releases.
•
ProductVer
•
Describes the product version. Example:
2.1.0
1 is the Major version of the manufactured product this means, new platform of the
product
2 is the Minor version of the manufactured product this means, new functions or new
hardware added to the product
3 is the Major revision of the manufactured product this means, functions or hardware
is either changed or enhanced in the product
•
IEDMainFunType
•
Main function type code according to IEC 60870-5-103. Example: 128
(meaning line protection).
•
SerialNo
•
OrderingNo
•
ProductionDate
15.3
Measured value expander block RANGE_XP
SEMOD52451-1 v2
15.3.1
Identification
SEMOD113212-2 v3
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Measured value expander block
RANGE_XP
-
-
Section 15
1MRK 511 423-UEN A
Basic IED functions
272
Bay control REC650 2.2 IEC
Application manual