ABB 2600T Pressure Transmitter Series User Manual Download | Manualshive

Page: 66 / 88

background image

364xS User’s Manual

66

Additional Safety

"Ex Safety" Aspects for North America

According to Factory Mutual Standards which can assure compliance with Essential Safety Requirements

FM 3600

: Electrical Equipment for use in Hazardous (Classified) Locations, General Requirements.

FM 3610

: Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, and

Class I, Zone 0 & 1 Hazardous (Classified) Locations.

FM 3611

: Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III Division 1

and 2 Hazardous (Classified) Locations.

FM 3615

: Explosionproof Electrical Equipment.

FM 3810

: Electrical and Electronic Test, Measuring and Process Control Equipment.

NEMA 250

: Enclosure for Electrical Equipment (1000 Volts Maximum)

The 364 pressure transmitter models have been certified by Factory Mutual for the following Class, Divisions
and Gas groups, hazardous classified locations, temperature class and types of protection.

Explosionproof for Class I, Division 1, Groups A, B, C and D, hazardous (classified) locations.

Dust Ignition proof for Class II, III Division 1, Groups E, F and G, hazardous (classified) locations.

Suitable for Class II, III, Division 2, Groups F and G, hazardous (classified) locations.

NonIncendive for Class I, Division 2, Groups A, B, C and D, in accordance with Nonincendive field
wiring requirements for hazardous (classified) locations.

Intrinsically Safe for use in Class I, II and III, Division 1, Groups A, B, C, D, E, F, and G in accordance
with Entity requirements for hazardous (classified) locations.

Temperature class T4 to T6 (dependent on the maximum input current and the maximum ambient
temperature).

Ambient Temperature range -50°C to +85°C (dependent on the maximum input current and the
maximum temperature

class).

Electrical Supply range Minimum 10.5 Volts, Maximum 42 Volts (dependent on the type of protection,
maximum ambient

Temperature, maximum temperature class and communication protocol).

Type 4X applications Indoors/Outdoors.

NOTE

The 364 pressure transmitter models installed in Explosionproof Class 1 Division 1 Group A, B, C

and D hazardous (classified) location does not require conduit sealing as per

FM 3615 sect 4.3 / NEC 501.15

.

For a correct installation in field of the 364 pressure transmitter models please see the related control
drawing.

Note that the associated apparatus must be FM approved.

«
...
64
65
66
67
68
...
»

Summary of Contents for 2600T Pressure Transmitter Series

























































































Reviews:

No comments

Related manuals for 2600T Pressure Transmitter Series

FX-ARM CONTROLLER

Brand: Magicfx Pages: 16

Brand: GE Pages: 242

Brand: GE Pages: 24

Brand: Balanced Body Pages: 3

Brand: VBM Pages: 36

Brand: W&H Med Pages: 122

Brand: Panta Safe Light Pages: 2

Brand: Calrec Pages: 70

Brand: Ransomes Pages: 282

Ransomes HR 6010

Brand: Jacobsen Pages: 10

Brand: Jet Pages: 12

Brand: R&S Pages: 2677

Saturn 2000 GC/MS

Brand: Varian Pages: 9

Heart Guardian AED

Brand: Radian Pages: 36

UltraVent XS Plus 6 2/3 E

Brand: Rational Pages: 220

ABS-Lock III-BE

Brand: ABS Pages: 8

Chlorinsitu-III

Brand: ProMinent Pages: 120

DuraTech 45' 3-Way Retrieval SRL-R

Brand: Falltech Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands