ABB 2600T Pressure Transmitter Series User Manual Download | Manualshive

Page: 21 / 88

background image

364xS User’s Manual

21

Installation

4. Plug and seal the ports. Make sure that when the installation has been completed, the ports are properly

sealed against entry of water and corrosive vapors and gases.

WARNING !

Cables, cable gland and unused port plug must be in accordance with the intended type of protection (e.g.

intrinsically safe, explosion proof, etc.) and degree of protection (e.g. IP6x or NEMA 4x). In particular, for

explosion proof installation, plug the unused opening with a plug certified for explosion containment.

5. Install the housing cover, turn it to seat O-ring into the housing and then continue to hand tighten until

the cover contacts the housing metal-to-metal. In EEx-d (Explosion Proof) installation, lock the cover
rotation by turning the set nut (use the 2 mm Allen key supplied with the instrument).

For further information find the relevant instruction manuals searching for the keyword “IM/*36*” on

www.abb.com

or from local ABB representatives.

Check the installation

Before applying power and pressure, perform the following checks.

√

Check

Installation environment conforms to the transmitter specification for ambient conditions

The transmitter is mounted securely

The transmitter is properly grounded

The input power voltage matches the transmitter nominal input voltage

The plugs/vents and process connections are tightened as specified

The proper electrical adapter are installed and are tightened as specified

The red plug on the electical input not used is replaced with a proper plug

The cover is tightened up to metal to metal contact with the housing

All the requirements are satisfied if the transmitter is working in hazardous area

Apply power

The transmitter will start up automatically at the power up.

Start up

The transmitter has default parameter settings that are sufficient for many situations and start up of the
instrument. However, review the configuration chapter for the default parameter settings values and the
parameter changes procedures.

«
...
19
20
21
22
23
...
»

Summary of Contents for 2600T Pressure Transmitter Series

























































































Reviews:

No comments

Related manuals for 2600T Pressure Transmitter Series

Brand: dbx Pages: 2

Brand: Eagle Group Pages: 8

Brand: NCR Pages: 20

Brand: DARAY Pages: 32

Body Armor Night Splint

Brand: Darco Pages: 2

Brand: MacDon Pages: 74

Brand: ParaBody Pages: 3

Brand: Valiani Pages: 66

Brand: Nederman Pages: 255

ST70 Instrument

Brand: Raymarine Pages: 12

Brand: Raven Pages: 73

Brand: Tascam Pages: 3

Brand: RAB Lighting Pages: 4

Brand: campgo Pages: 33

Brand: Mach Pages: 12

ULTRATHERM 908i

Brand: gbo Pages: 32

Brand: Dantel Pages: 6

Brand: Zero 88 Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands