364xS User’s Manual
13
Installation
Level measurement with closed tanks and non
condensable fluids (dry leg)
1. Mount the transmitter at the same height or below
the lowest level to be measured.
2. Connect the
High Pressure Side (P2 as default)
of the transmitter to the bottom of the tank
3.
Connect the
Low Pressure Side (P1 as default)
of
the transmitter to the upper part of the tank, above
the maximum level of the tank.
Level measurement with closed tanks and
condensable fluids (wet leg)
1. Mount the transmitter at the same height or below
the lowest level to be measured.
2. Connect the
High Pressure Side (P2 as default)
of the transmitter to the bottom of the tank
3. Connect the
Low Pressure Side (P1 as default)
of
the transmitter to the upper part of the tank.
4. Fill the vertical section of the connecting line to the
upper part of the tank with a compatible liquid
through the dedicated filling tee.
Filling
tee
Gate
valve
Drain
Valve
Wet leg
Gate
valve
Gate
valve
Gate
valve
Condensate trap
(optional)
minimum level
maximum level
minimum level
maximum level
Summary of Contents for 2600T Pressure Transmitter Series
Page 1: ...InstrumentationIT 2600T Pressure Transmitter family ABB User s Manual 364DS and 364PS Models ...
Page 7: ...364xS User s Manual 7 This page has been intentionally left blank ...
Page 72: ...364xS User s Manual 72 Additional Safety ...
