ABB 2600T Pressure Transmitter Series, User Manual

Page: 41 / 88

364xS User’s Manual 41
Operation
Note
The Main Menu, the Sub Menu, the Sub Sub Menu and the Utility view are also indicated on the display with
a number. The menu navigation can be described also as a sequence of the corresponding numbers that is
called “Digital LCD Integral Display Keys sequence“
In any case the following table better details the available functions. The instructions of this manual further
define the Digital LCD Integral Display menu sequence to run an operation.
Display indication Description Level Type
Easy Setup
This function helps the end user to run the
instrument basic configuration
Main Menu
Language Set the display language Utility Enumerated
Pressure Polarity Set the pressure transmitter High pressure side Utility Enumerated
Engineering Unit Set the Engineering Variable unit Utility Enumerated
Set LRV Set the Lower Range Value Utility Numerical
Set URV Set the Upper Range value Utility Numerical
Transfer Function Type Set the transmitter output transfer function Utility Enumerated
Lin Point
Set the point up to the output is linear with input if
the Square root is set
Utility Numerical
Low Flow Cut Off
Set the point up to the output is zero for any input
value, when square root is selected
Utility Numerical
Auto-Set Zero Scaling Set the Primary Variable at Zero Utility Auto Adjust
Damping Set the damping value Utility Manual Adjust
Device Config
This function provides all the settings related to the
device configuration
Main Menu
Rerange This function provides the transmitter rerange Sub Menu
Rerange with pressure
This function provides the transmitter rerange
when a pressure source is available Sub Sub
Menu
Set LRV (0%) Set the Low Range Value at the applied pressure Utility Auto Adjust
Set URV (100%) Set the Upper Range Value at the applied pressure Utility Auto Adjust
Rerange no pressure
This function provides the transmitter rerange
when no pressure source is available Sub Sub
Menu
Engineering Unit
Select the engineering units for the Engineering
variable
Utility Enumerated
Set LRV Set the Lower Range Value at the defined value Utility Numerical
Set URV Set the Upper Range Value at the defined value Utility Numerical
Percentage Rerange
This function provides the transmitter rerange
when any pressure source is available related to
the percentage value
Sub Sub
Menu
Set LRV (0%)
Set the Lower Range Value at the defined value in
percentage
Utility Numerical
Set URV (100%)
Set the Upper Range Value at the defined value in
percentage
Utility Numerical
PV Scaling This function provides the Primary Variable Scaling Sub Menu
Auto-Set Zero Scaling Shift the primary variable to zero Utility Auto Adjust