ABB 2600T Pressure Transmitter Series, User Manual

Page: 42 / 88

364xS User’s Manual 42
Operation
Display indication Description Level Type
PV Scaling
Shift the primary variable to the defined pressure
value
Utility Numerical
Reset PV Scaling Remove the existing Primary Variable Scaling Utility Auto Adjust
Damping Set the damping value Utility Manual Adjust
Output on Alarm This function provides the alarm settings Sub Menu
Failure mode Set the failure mode in down scale or upscale Utility Enumerated
Set fail current
This function provides the current values in case of
output saturation or transmitter fail Sub Sub
Menu
High saturation Set the high saturation current at the desired value Utility Numerical
Low saturation Set the low saturation current at the desired value Utility Numerical
Fail high Set the high fail current at the desired value Utility Numerical
Fail low Set the low fail current at the desired value Utility Numerical
Pressure Polarity Set the pressure transmitter High pressure side Utility Enumerated
Transfer Function
This function provides the output transfer function
setting
Sub Menu
Type Set the transmitter transfer function type Utility Enumerated
Linearization Point
Set the value up to the transfer function is linear
when the square root is selected
Utility Numerical
Low Flow Cut Off
Set the value up to the transfer function is zero
when the square root is selected
Utility Numerical
SW Write Protect Set the write protection of the device Utility Enumerated
Display
This function provides all the settings related to the
display configuration
Main Menu
Language Set the display language Utility Enumerated
Operator View Set the Operator view mode Utility Enumerated
Display Variable 1 Set the display first line variable Utility Enumerated
Display Variable 2 Set the display second line variable Utility Enumerated
Display Bargraph Set the bargraph variable Utility Enumerated
Contrast Set the display contrast Utility Manual Adjust
Display Settings
This function has all the settings related with the
variable on the display
Sub Menu
Display Eng. unit
This function set the display to show the
Engineering unit Sub Sub
Menu
Pressure
Set the display to show the Engineering unit of
pressure
Utility Enumerated
Temperature
Set the display to show the Engineering unit of
temperature
Utility Enumerated
Flow Set the display to show the Engineering unit of flow Utility Enumerated
Mass & Volume
Set the display to show the Engineering unit of
mass and volume
Utility Enumerated
Density
Set the display to show the Engineering unit of
density
Utility Enumerated
Level
Set the display to show the Engineering unit of
level
Utility Enumerated
Other
Set the display to show the Engineering unit not in
the main list
Utility Enumerated
Custom Unit
Set the display to show the customized
Engineering unit
Utility ASCII String