Aastra 9617 Online User'S Manual Download Page 47

Page: 47 / 461

The Clear Message Waiting option

There may be times when

Message Waiting

appears on

the telephone display and the set indicator light continues
flashing when there are no new Voice Mail messages.

If so, you can turn the display message and light off using
the Clear Message Waiting option.

To clear message waiting:

Press the Options key.

Enter your Options password if required. Refer to

Set-

ting the Options password using the telephone

on page 87 for more information.

Use

to scroll to option number 6 or press

‚ fl

Press

•

to clear message waiting.

Press

for the line with the Voice Mail ser-

vice.
If required, repeat steps 4 and 5 for the other line.

Note

: This option only applies if you subscribe to Voice

Mail services from your telephone company.

Summary of Contents for 9617














































































































































































































































































































































































































































































Search results

Summary of Contents for 9617

Reviews:

Brands by name

Popular brands

Aastra 9617, Online User'S Manual

Search results

Summary of Contents for 9617

Reviews:

Brands by name

Popular brands