Aastra 9617 Online User'S Manual Download Page 344

Page: 344 / 461

344

Copying Callers List numbers to the
Directory or a Memory key

To copy a number from the Callers List to the Direc-
tory or to a memory key:

Press

≈

Press

. This step is not necessary if the Call-

ers List Mode is set to the combined option. For more
information about the Caller List Mode, refer to

Set-

ting the Callers List mode

on page 338.

Find the item you want to copy.

Press

or the memory key where you want

to store the number.

If no name is displayed, you are prompted to enter
one. To enter a name, use the dialpad. (Refer to

Entering Names

on page 153.) If you don’t want a

name, go to step 7.

Press

To leave the Callers List at any time, press

≈

Summary of Contents for 9617














































































































































































































































































































































































































































































Search results

Summary of Contents for 9617

Reviews:

Brands by name

Popular brands

Aastra 9617, Online User'S Manual

Search results

Summary of Contents for 9617

Reviews:

Brands by name

Popular brands