Aastra 6735i User Manual Download Page 159

Page: 159 / 219

Managing Calls

41-001451-00 REV00 – 07.2011

152

10.

Click on

Basic Settings->Preferences->General

11.

In the “

Call Forward Key Mode

” field, select a call forward mode to use on the phone. Valid values are: Account,

Phone, Custom. Default is

Account

•

Account

- (default) The account mode allows you to configure CFWD on a per account basis. Pressing a configured

CFWD key applies to the account in focus.

•

Phone

- The Phone mode allows you to set the same CFWD configuration for all accounts (

All

Busy

, and/or

Answer

). When you configure the initial account, the phone applies the configuration to all other accounts. (In the

Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same
configuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all
accounts on the phone.

•

Custom

- The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure

a specific state (

All

Busy

, and/or

No Answer

) for each account independently or all accounts.On the 6735i, you

can set all accounts to

All On

All Off

, or copy the configuration for the account in focus to all other accounts using

CopytoAll

softkey.

Note:

If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if
the mode was set to “Phone”.

12.

Click

Save Settings

The changes takes affect immediately without a reboot.

Summary of Contents for 6735i




























































































































































































































Search results

Summary of Contents for 6735i

Reviews:

Related manuals for 6735i

Brands by name

Popular brands

Aastra 6735i, User Manual

Search results

Summary of Contents for 6735i

Reviews:

Related manuals for 6735i

Brands by name

Popular brands