Aastra 67 Series Administrator'S Manual Download

Page: 657 / 1140

Operational Features

41-001160-04 Rev 02, Release 2.5

5-351

Configuring Operational Features

The “

XML SIP Notify

" field is disabled by default. To enable this field, check the box.

This field enables or disables the phone to accept or reject an aastra-xml SIP NOTIFY message.

Note:

To ensure the SIP NOTIFY is coming from a trusted source, it is recommended that you enable

the Whitelist feature (

Whitelist Proxy

parameter) on the IP phone. If enabled, and the phone

receives a SIP NOTIFY from a server that is NOT on the whitelist (i.e. untrusted server), the phone
rejects the message.

Click

to save your changes.

Aastra Web UI

Summary of Contents for 67 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 67 Series

Reviews:

Related manuals for 67 Series

Brands by name

Popular brands

Aastra 67 Series, Administrator'S Manual

Search results

Summary of Contents for 67 Series

Reviews:

Related manuals for 67 Series

Brands by name

Popular brands