Aastra 67 Series Administrator'S Manual Download Page 517

Page: 517 / 1140

Operational Features

41-001160-04 Rev 02, Release 2.5

5-211

Configuring Operational Features

The following describes the DND key behavior for each DND mode.

•

Account

- DND key toggles the account in focus on the IP Phone UI, to ON

or OFF if DND enabled for that account.

•

Phone

- DND key toggles all accounts on the phone to ON or OFF.

•

Custom

- DND key displays custom screens on the IP Phone UI. User can

select whether to enable/disable DND per account, enable DND on all
accounts, or disable DND on all accounts.

The following table describes the DND key and Message Waiting Indicator
(MWI) LEDs when you enable DND on the IP Phone.

You can configure the DND softkey and the DND mode (

Account

Phone

Custom

) using the configuration files or the Aastra Web UI. Once you configure

DND, you can access the DND screen on the IP Phone UI.

Important Notes

•

In the Aastra Web UI, the “Account Configuration” page replaces the
previous “Call Forward Settings” page.

•

In the IP Phone UI, the new DND key feature now has new menu screens.

•

If you make changes to the configuration for DND via the IP Phone UI,
you must refresh the Aastra Web UI screen to see the changes.

Softkey LED Behavior
for All Modes

MWI LED Behavior
for All Modes

DND key LED

RED

if current account in

focus has DND ON.

DND key LED

OFF

when current account

in focus has DND disabled.

MWI LED

if current account in focus has

DND ON.

MWI LED

OFF

if current account in focus

has DND OFF.

Summary of Contents for 67 Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 67 Series

Reviews:

Related manuals for 67 Series

Brands by name

Popular brands

Aastra 67 Series, Administrator'S Manual

Search results

Summary of Contents for 67 Series

Reviews:

Related manuals for 67 Series

Brands by name

Popular brands