
The Device Menu
91
you can configure a melody for each trunk key. Select the
desired key, e.g.
L1: [internal call number]
, and then press
the
Ok
softkey. Under
Internal
select the melody for internal
calls to this trunk key.
External
: Select melody for external calls.
If there are multiple trunk keys configured on your telephone,
you can configure a melody for each trunk key. Select the
desired key, e.g.
L1: [internal call number]
, and then press
the
Ok
softkey. Under
External
select the melody for external
calls to this trunk key.
Message
: Selects the melody upon reception of new short
messages.
VIP call
: Selects the melody for incoming VIP calls (call numbers on
your VIP list, see page 37).
Emergency call
: Selects the melody for incoming emergency calls.
Alarm clock
: Selects the melody for the alarm clock.
Appointment
: Selects the melody for the appointment.
Type
: This setting is where you determine how selected melodies are
signalled.
Repeat
: The melody is played repeatedly as long as the call is
signalled.
Single
: The melody is played only once.
Device
: You can select the combination of signal generators with which the
call will be signalled. Press the
Edit
softkey to switch a signal
generator on/off.
Ringer
: Signalling via loudspeaker.
Vibra call
(not on the Aastra 610d): Signalled via vibrator.
Headset
: Signalled on the headset if this is connected to the mobile
unit.
Note:
If you switch off all signal generators, a call is only signalled
optically on the display.
Volume
: Displays the currently set ringer volume. For changing the volume,
use the and
navigation keys or enter a number (1 … 7)
(
Increasing
or level 1…7).
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299